Meet the ROKR Harvest Windmill Table Clock LCA01. Build a wooden windmill with a working clock in its tower and a miniature farmyard around the base. Our new DIY kit combines practical timekeeping with motorized mechanisms and small details you can operate after assembly.

A Clock Set Into a Four-Sailed Windmill
Four windmill sails sit above the Roman-numeral dial, and a rooster weather vane crowns the roof. The clock face is built into the front of the tower, above a fenced walkway, with a quartz movement providing its timekeeping function.
Below the wooden structure, a red-brick base holds the barn and farmyard. The tower, dial and lower scene share one vertical layout, so you can read the time at the front and look down to the smaller figures underneath.

What Moves Under Motor Power
A dual-motor system powers the animated display. When running, the four sails rotate, sheep travel around the farmyard, and the grain-grinding mechanism turns. These movements take place at different heights, giving you several parts of the model to watch.
The grain-grinding mechanism recalls the traditional role of windmills in grinding grain into flour. In Harvest Windmill, electric motors provide the motion.

Details You Operate by Hand
- Rooster weather vane. Adjust the roof-mounted rooster by hand.
- Hand-operated hoist. Turn the small hoist beside the balcony to explore another piece of the mill’s machinery.
- Barn doors. Open the small doors in the brick base to reveal the cow inside.
Warm Light, Music and Touch Controls
Warm lighting shows through the windows, and the built-in music plays “Picnic March.” Touch control lets you choose how to run the display.
Tap once to start the sails and lights, then tap again for movement with music. Press and hold to turn the effects off. They also shut off automatically after 30 minutes without interaction.
Power the motors, lighting and music through the Type-C connection. You will need to provide a suitable power cable separately.

An Advanced Build Beyond the Outer Walls
The kit contains 563 pieces and has an estimated assembly time of 8–10 hours, with an Advanced five-star difficulty rating. Give yourself time for a substantial project, with your own pace depending on experience and how you divide the work into sessions.
Assembly brings together the tower, clock movement, motorized sections, gears and lighting, as well as the smaller hand-operated details. The work includes fitting the functional components into the structure. Keep the parts organised and follow the manual’s checks for the moving sections before placing the finished clock on display.
Make Room to Read the Time and Reach the Controls
The finished windmill measures approximately 23.1 × 19.2 × 35.6 cm. Choose a desk, sideboard or open shelf with enough height and clear space around the rotating sails.
Face the dial towards where you usually sit or check the time. Leave the touch control, hoist, barn doors and power connection accessible, with the lower farmyard in view. This lets the model serve as a table clock while keeping its mechanical details within reach.